Search
US Dollar
Paint, Adhesives, Sealants, Putty & Tapes
GEDORE RED CATRIDGE CAULKING GUN
NKN44369
- With stable aluminium pipe
- Easy to handle and clean
- Quick and easy cartridge change
$14.47
GENKEM MOSAIC 5/7kg WOOD BLOCK ADHESIVE
XXN01117
- Ideal the installation of wood-mosaics
- Can be used for the installation of cork tiles
- High quality
$30.30
GLUE DEVIL 1 kg CARPET AND VINYL ADHESIVE
SFO69917
- Quick-drying adhesive with an aggressive tack
- Used to stick down carpet or vinyl tiles.
- Easy and safe to use, with low odour – Ideal for use in occupied buildings.
$8.34
GLUE DEVIL 500ml CONTACT ADHESIVE
JRC43152
- General purpose adhesive
- Offers superior bond strength without requiring clamping or sustained pressure
- Water and heat resistant up to 80°C
$7.07
GLUE DEVIL GD43 6 ml NUTLOCK
GRN67727
- Prevents loosening of threaded parts due to vibration.
- Locks bolts and nuts up to 20mm diameter.
- Chemical resistant against fuels,lubricants and gases.
$2.31
GLUE DEVIL GLOSS BLACK 300ml SPRAY PAINT
SVU13972
- Quick drying
- Gives you a bright and smooth finish
- Suitable for interior and exterior applications
$3.07
GLUE DEVIL GLOSS SIGNAL RED 300ml SPRAY PAINT
KJR25409
- Quick drying
- Gives a bright and smooth finish
- For interior and exterior use
$3.12
GLUE DEVIL GREY PRIMER 300ml SPRAY PAINT
OEF70473
- Quick drying
- Gives you a bright and smooth finish
- Suitable for interior and exterior applications
$3.12
GLUEDEVIL BLACK 280ml AUTOMOTIVE SILICONE SEALANT
EUG50028
- Waterproof and weather-proof
- Excellent for use inside, outside and underneath the car.
- Excellent resistance to severe weathering conditions
$5.81
GLUEDEVIL 100ml WOOD GLUE
RGT62596
- Very good heat resistance
- Good water resistance
- Excellent for both soft woods and hard woods
$1.92
GLUEDEVIL 12x100mm GLUE STICKS
ZCO01600
- Sets quickly
- Excellent adhesion for bonding plastic, metal, ceramics.
- Can be applied using hot melt glue guns
$1.58
GLUEDEVIL 12x150mm GLUE STICKS
SIZ23472
- Sets quickly
- Excellent adhesion for bonding plastic, metal, ceramics.
- Can be applied using hot melt glue guns
$1.56
GLUEDEVIL 12x300mm 1kg GLUE STICKS
JEH42260
- Sets quickly
- Excellent adhesion for bonding plastic, metal, ceramics.
- Can be applied using hot melt glue guns
$11.45
GLUEDEVIL 1Lt CONTACT ADHESIVE
MQR01426
- General purpose adhesive
- Offers superior bond strength without requiring clamping or sustained pressure
- Water and heat resistant up to 80°C
$10.03
Min:
$0.00
Max:
$242.00
$0
$242
Filter by
Filter by attributes
- Material
- Storage
- Flexible at temperatures as low as
- Full strength
- Scraper Material
- Skin formation
- Type of solvent
- 60% strength in 20 minutes
- Aapplication
- Acidity
- Adhesion
- Adhesive style
- Apllication
- Apllication
- Appearance
- Appearance
- Appearance and Type
- Appearance:
- Appearence
- Apperance
- Apperanvce
- Applicable Power
- Applicatio
- Application
- Application
- application
- Application Environment
- Application method
- Application methods
- Application methods
- Application Rate
- Application temperature
- Application temperature
- Application Temperature
- Application temperature range
- Application temperature range
- Application Temperature:
- Application Temperature:
- Application type
- Applications
- Applications
- Applicatiuon
- Appliction
- Appllication
- Base
- Base/Type
- Blade Length
- Blade material
- Boiling Point
- Boiling Point
- Boiling point
- Boiling point/range
- Bristle
- Bristle material
- Bristle type
- Bristle type
- Bristles
- Bristles
- Brush size
- Brush Size
- Brush sizes
- Can be cut
- Cap Colour
- Cap colour
- Capacity
- Capacity
- Catridges sizes
- Clean Up
- Cleaning
- Cleaning
- Cold Resistance
- Color
- COlor
- Color
- Colour
- Colour
- Colour – Prior to curing
- Colour – Prior to mixing
- Colour – Upon curing
- Colour / Finish
- Colour/Finish
- Complete Curing (20°C):
- Completely dry Time
- Composition
- compressive strength at 25°C
- Compressive strength at 25°C of 70 MPa
- Contents
- Continous temperature Rating
- Continuous Temperature rating
- Contious temperature rating
- Coverage
- Coverage
- Coverage – 280ml cartridge
- Coverage (280ml cartridge)
- Coverage (280ml catridge)
- Coverage (90ml cartridge)
- Coverage (90ml tube)
- Coverage for 280ml cartridge
- Coverage per litre
- Coverage/kg
- Coverage/kg
- Coverage/L
- Cure Time
- Curing time
- Curing time
- Curing time Approx
- Curing time Approximately
- Density
- Density
- Density
- Density (g/cm³)
- Density @ 20 °C
- Density 1.62 g/cm3 at 23°C
- Density Approx
- Density Approximately 1.06g/cm³
- Density:
- DENSİTY: 17±2 kg/m3
- Disposal
- Dry time
- Dry time
- Drying
- Drying
- Drying Time
- Drying time
- Drying Time
- Drying time
- Dust dry
- Final cure
- Final setting time
- Finisg
- Finish
- Finish
- FInish
- FInish
- Flamablity
- Flammable
- Full cure
- Full Cure
- Full cure time
- Full strength
- Full strength
- Full strength time
- Full tensile strength
- Gap filling properties
- Handle
- Handle material
- Handle Material
- Handle Material
- Handle materiual
- Handling bond in 4½ minutes
- Handling bond time
- Hard dry
- Hardens in
- Hardens in
- Health
- Health & Safety
- Heat resistance
- Heat resistance
- Heat resistance
- Heat Resistance
- Heat resistance
- Heat Resistance
- Heat resistant
- Heat resistant
- Indoor/outdoor
- Indoor/Outdoor
- Ingredients
- Initial boiling point and boiling range:
- Maimum temperature resistance
- Main component
- Material
- Materials bonded
- Maximum bond strength (
- Maximum Contineuos heat
- Maximum Continuous high temperature
- Maximum Temperature resistance
- Maximum temperature resistance
- Maximun thickness per coat
- Melting point/freezing point:
- Minimum Application Temperature
- Minimum application temperature
- Mix ratio
- Mixage
- Oil resistance
- Operating Temperature
- Operating temperature
- Operating Temperatures
- Operating temperatures
- Overcoating Time
- Overcoating Time
- Paint
- Paint Brush Size
- Paint type
- Perfomance
- pH
- PH
- PH
- pH:
- Pressing and Clamping time
- Product Colour
- Product colour
- Quality
- Quantity
- Ready-to-cut time
- Recoat
- Recoat
- Recoat time
- Recoat Time
- Recoating
- Recoating
- Recoating time
- Recoating Time
- Recoating Time
- Recoating time
- Recommended Gap
- Recommended gap
- Recommended maximum gap
- Roll Length
- Roller size
- Safety
- Scraper Material
- Scraper Size
- Service Temperature
- Service Temperature
- Service temperature range
- Service temperature range
- Set Time
- Set time
- Sets hard
- Setting time
- Setting time
- Setting/drying time
- Settting time
- Shelf life
- Shelf Life
- Shelf life
- Size
- Size
- SIze
- Sizes
- Skin Formation
- Skin formation
- Solids
- Solubility in Water
- Solubility in water
- Solubility In Water
- Spread Rate
- Spread rate
- Spread rate
- State
- Storage
- Storage Temperatue
- Storage temperature
- Surface dry
- Tack free time:
- Tack off time
- Temperature resistance
- Temperature Resistance
- Temperature resistance
- Temperature Resistance
- Temperature resistance up to 180°C
- Temperature resistance
- Temperature Resistance:
- Tensile Strength
- Thickness
- Thining
- Thinner
- Thinning
- Thinning
- THinning
- Time to full cure
- Time to initial set
- Time to initial set Min
- Tintable
- Touch dry
- Touch Dry
- Touch dry time
- Touch dry time
- Touch drying
- Type
- Type
- Type
- Type Neutral cure
- Type of Application
- Type of Paint
- Type Water based
- Use
- Use
- Viscosity Paste
- Water resistance
- Water resistance
- Water Resistance
- White point:
- Will set in about 14 minutes.
