Search
US Dollar
Paint, Adhesives, Sealants, Putty & Tapes
ALCOLIN 90ml CONTACT ADHESIVE
DWH46291
- Good heat resistance
- Bonds instantly on contact to a variety of surfaces without clamping or sustained pressure
- Suitable for interior and exterior applications
$3.49
ALCOLIN BLACK 280ml SILICON SEALANT
LVX71308
- Contractors grade
- Provides a permanent flexible watertight seal
- Heat resistance up to 150°C
$6.99
ALCOLIN BLACK SILICONE TAPE
ASW14652
- It withstands extremes in temperature, pressure, voltage, moisture, corrosion and contaminants
- Creates a temporary or permanent air and water-tight seal
- Self-fusing
$7.99
ALCOLIN CHERRY 200g WOODFILLER
JBJ15800
- Used to fill cracks, splits, holes and surface defects and imperfections in all kinds of wood
- Can be over-coated with varnish or paint
- Dries to a hard finish
$1.99
ALCOLIN CLEAR 280ml SEALANT SILICONE
KBR79813
- Contractors grade
- Ideal for sealing, bonding, and mending in cars, boats and caravans
- Heat resistance up to 150°C
$5.99
ALCOLIN EASY TILER 1.5kg CERAMIC TILE ADHESIVE
PXN22085
- Ready to use
- Good anti-slump properties
- High bond strength
$7.99
ALCOLIN FIX-ALL NO MORE NAILS 50ml UNIVERSAL GRAB ADHESIVE
NTY12409
- Adheres to virtually all common building materials
- Replaces nails and screws in a multitude of applications
- Synthetic rubber-based universal adhesive paste
$4.99
ALCOLIN GREEN SILICONE TAPE
HGY78822
- It withstands extremes in temperature, pressure, voltage, moisture, corrosion and contaminants
- Creates a temporary or permanent air and water-tight seal
- Self-fusing repair tape
$7.99
ALCOLIN HI-TACK 1Lt CARPET & VINYL ADHESIVE
ZKA59265
- High performance,
- Very good bond strength.
- Versatile - Bonds a variety of carpet and vinyl backings to various substrates
$12.99
ALCOLIN IMBUIA 200g WOODFILLER
NNK57331
- Used to fill cracks, splits, holes and surface defects and imperfections in all kinds of wood
- Can be over-coated with varnish or paint
- Dries to a hard finish
$1.99
Min: $0.00 Max: $190.00
$0 $190
Filter by
Filter by attributes
- Material
- Storage
- Flexible at temperatures as low as
- Finish
- Full strength
- Scraper Material
- Aapplication
- Acidity
- Adhesion
- Adhesive style
- Apllication
- Apllication
- Appearance
- Appearance
- Appearance and Type
- Appearance:
- Appearence
- Apperance
- Apperanvce
- Application
- Application
- application
- Application Environment
- Application method
- Application methods
- Application methods
- Application Rate
- Application temperature
- Application temperature
- Application Temperature
- Application temperature range
- Application temperature range
- Application Temperature:
- Application Temperature:
- Application Tool
- Application type
- Applications
- Applications
- Applicatiuon
- Appliction
- Appllication
- Base/Type
- Blade Length
- Blade material
- Boiling Point
- Boiling Point
- Boiling point
- Boiling point/range
- Bristle
- Bristle material
- Bristle type
- Bristle type
- Bristles
- Bristles
- Brush size
- Brush Size
- Brush sizes
- Cap Colour
- Cap colour
- Capacity
- Capacity
- Catridges sizes
- Clean Up
- Cleaning
- Cleaning
- Cold Resistance
- Color
- Color
- COlor
- Colour
- Colour
- Colour
- Colour – Prior to curing
- Colour – Prior to mixing
- Colour – Upon curing
- Colour / Finish
- Colour/Finish
- Complete Curing (20°C):
- Completely dry Time
- Composition
- Contents
- Continous temperature Rating
- Continuous Temperature rating
- Contious temperature rating
- Coverage
- Coverage
- Coverage – 280ml cartridge
- Coverage (280ml cartridge)
- Coverage (280ml catridge)
- Coverage (90ml cartridge)
- Coverage (90ml tube)
- Coverage for 280ml cartridge
- Coverage per litre
- Coverage/kg
- Coverage/kg
- Coverage/L
- Cure Time
- Curing time
- Curing time
- Curing time Approx
- Curing time Approximately
- Density
- Density
- Density
- Density (g/cm³)
- Density @ 20 °C
- Density 1.62 g/cm3 at 23°C
- Density Approx
- Density Approximately 1.06g/cm³
- Density:
- Disposal
- Dry time
- Dry time
- Drying
- Drying
- Drying Time
- Drying time
- Drying Time
- Drying time
- Dust dry
- Final cure
- Final setting time
- Finisg
- Finish
- FInish
- Finish
- FInish
- Flamablity
- Flammable
- Full cure
- Full Cure
- Full strength
- Full strength
- Full strength time
- Full tensile strength
- Gap filling properties
- Handle
- Handle material
- Handle Material
- Handle Material
- Handle materiual
- Hard dry
- Hardens in
- Hardens in
- Health
- Health & Safety
- Heat resistance
- Heat resistance
- Heat resistance
- Heat Resistance
- Heat resistance
- Heat Resistance
- Heat resistant
- Heat resistant
- Indoor/outdoor
- Indoor/Outdoor
- Initial boiling point and boiling range:
- Long term temperature exposure
- Maimum temperature resistance
- Material
- Materials bonded
- Maximum bond strength (
- Maximum Continuous high temperature
- Maximum Temperature resistance
- Maximun thickness per coat
- Melting point/freezing point:
- Minimum Application Temperature
- Minimum application temperature
- Mix ratio
- Oil resistance
- Operating temperature
- Operating Temperatures
- Operating temperatures
- Overcoating Time
- Overcoating Time
- Paint
- Paint Brush Size
- Paint type
- Perfomance
- pH
- PH
- PH
- pH:
- Pressing and Clamping time
- Product Colour
- Product colour
- Quality
- Quantity
- Recoat
- Recoat
- Recoat time
- Recoat Time
- Recoat time
- Recoating
- Recoating
- Recoating time
- Recoating Time
- Recoating Time
- Recoating time
- Recommended Gap
- Recommended gap
- Recommended maximum gap
- Roller size
- Safety
- Scraper Material
- Scraper Size
- Service Temperature
- Service Temperature
- Service temperature range
- Service temperature range
- Set Time
- Set time
- Sets hard
- Setting time
- Setting time
- Settting time
- Shelf life
- Shelf Life
- Shelf life
- Short term temperature exposure
- Size
- Size
- SIze
- Sizes
- Skin Formation
- Skin formation
- Softening time
- Solids
- Solubility in Water
- Solubility in water
- Solubility In Water
- Spread Rate
- Spread rate
- Spread rate
- State
- Storage
- Storage Temperatue
- Storage Temperature
- Storage temperature
- Surface dry
- Tack free time:
- Tack off time
- Temperature resistance
- Temperature Resistance
- Temperature resistance
- Temperature Resistance
- Temperature resistance up to 180°C
- Temperature Resistance:
- Tensile Strength
- Thining
- Thinner
- Thinner
- Thinning
- Thinning
- THinning
- Time to full cure
- Time to initial set
- Time to initial set Min
- Tintable
- Touch dry
- Touch Dry
- Touch dry time
- Touch dry time
- Touch drying
- Type
- Type
- Type
- Type Neutral cure
- Type of Paint
- Type Water based
- Use
- Use
- Viscosity Paste
- Water resistance
- Water resistance
- Water Resistance
- White point:
- Will set in about 14 minutes.
Manufacturers
Payment options
