Paint, Adhesives, Sealants, Putty & Tapes

• Material
• Aluminium
• Arcylic
• Bitumen
• Crepe paper
• Fibre glass
• Oil based
• Polythene
• Powder
• Silyl Modified Polymer
• Type Acrylic latex
• Waterbased
• Wooden handle

• Storage
• Cool , well ventilated, and below 23ºc
• Cool, well-ventilated area below 23˚ C.
• Store under cover until used

• Flexible at temperatures as low as
• -40°C

• Finish
• Slight sheen

• Full strength
• 24Hrs
• Obtained after 24 hours.

• Scraper Material
• Stainless Steel

• Skin formation
• Approx. 10 min.

• Type of solvent
• Water based

• 60% strength in 20 minutes
• 20 minutes

• Aapplication
• Aquarium

• Acidity
• 5 - 7

• Adhesion
• Superior

• Adhesive style
• Single-Sided

• Adhesive will harden fully
• Approx. 30 seconds s after all liquid has been applied

• Apllication
• Brush or roller
• Brush, roller
• Brush, roller or road lining machine
• Brush, roller or spray
• Conventional or airless spraying
• Dipping or airless spray
• Dipping or spray

• Apllication
• Household, automotive & industrial

• Appearance
• Beige foam
• Clear, homogenous non sag paste
• White creamy paste
• White, viscous liquid
• Appearance Clear, homogenous non sag paste
• Appearance Homogenous non sag paste – clear
• Appearance Off-white pliable putty
• Appearance Putty like consistency of various colours
• Appearance Viscous tan liquid, drying to a beige coloured glue line
• Appearance White, trowel-able paste
• Beige trowelable mastic
• Clear
• Clear viscous liquid
• High Gloss
• Homogenous non sagging paste
• Imbuia Homogenous non sag paste
• Khaki homogenous non sag paste
• Matt to Low Sheen
• Meranti Homogenous non sag paste
• Mid-sheen
• Oak Homogenous non sag paste
• Off white trowelable paste
• Pale orange foam
• Pine Homogenous non sag paste
• Putty like
• Suede
• Translucent yellow liquid
• Viscous brown liquid drying to a beige rigid film
• Viscous white liquid
• White, homogenous non sag paste

• Appearance
• Liquid, colourless to straw liquid
• Matt
• Mid sheen
• White viscous liquid
• Appearance Clear, colourless liquid
• Appearance Homogenous non sag paste in grey or white
• Black
• Black
• Black Homogenous non sagging paste
• Black, homogenous non sag paste
• Bronze
• Bronze homogenous non sagging paste
• Brown
• Clear
• Clear homogenous non sagging paste
• Clear liquid
• Clear viscous liquid
• Clear, colourless viscous liquid
• Clear, homogenous non sag paste
• Grey
• Heavy Textured Paste
• Liquid
• Low sheen
• Matt
• Matt
• Matt finish
• Matt to Low Sheen
• Suede
• Thick yellow liquid
• Translucent paste
• Translucent yellow liquid
• Transparent
• White
• White homogenous non sagging paste
• Yellow-amber Liquid

• Appearance and Type
• Synthetic Rubber spray

• Appearance:
• White Paste

• Appearence
• Clear, colourless viscous liquid
• White creamy paste

• Apperance
• Powder coated
• Black
• Black tough elastic tape
• Brown
• Clear, almost colourless liquid
• Green tough elastic tape
• Liquid
• Liquid, colorless
• Opaque liquid
• Thixotropic
• Translucent
• Translucent yellow liquid
• White
• White Putty
• White stick
• White tough elastic tape
• White viscous liquid

• Apperanvce
• Epoxy-urethane hybrid

• Applicable Power
• 600v and below

• Application
• Bathroom and Plumbing
• Interior and exterior
• Light industry, household furniture, and construction industry.
• Temperature +5 to +35 °C
• All purpose
• Automotive
• Automotive and general application
• Automotive and general purpose
• Automotive, industrial and general purpose
• Automotive, industrial and house hold
• Bathroom
• Bolts and nuts
• Brush
• Brush & roller
• Brush & spray
• Brush , roller and spray
• Brush , roller or airless spray
• Brush / Roller
• Brush / Roller / Airless spray
• Brush / Roller / Airless Spray
• Brush / Roller and Airless spray
• Brush and roller
• Brush only
• Brush or cloth
• Brush or roller
• Brush or Roller
• Brush or Spray
• Brush or spray
• Brush, dipping & spray
• Brush, Roller
• Brush, Roller (short-nap mohair or foam), or airless spray
• Brush, roller or airless spray
• Brush, Roller or airless spray
• Brush, roller or airless spray
• Brush, Roller or Airless Spray
• Brush, roller or spray
• Brush, roller or Spray.
• Brush, Roller, Spray
• Brush, roller, spray
• Brush, Spray
• Brush,roller and spray
• Building
• Building and DIY industry
• Car and DIY
• Carpet and Vinyl
• Carpet or vinyl tiles
• Ceilings
• Cloth or sponge
• Commercial and domestic
• Construction and almost every application imaginable
• Construction, and DIY
• Degreasing, cleaning
• Electrical
• Electrical, Automotive plumbing and industrial
• Excellent for exterior
• Fills, seals and Insulates
• Fish tanks and aquarium
• Fixing
• Footwear repair and DIY
• General and DIY
• General application
• General Purpose
• General Purpose
• General purpose
• General purpose, filling and grouting
• Heavy duty Indoor and outdoor
• Heavy-duty marine applications
• High strength
• Home, office and school
• Household , automotive and industrial use
• Household and handcraft uses
• Household and outdoor repairs
• Household, asutomotive & industrial
• Household, automotive & industrial
• Household, automotive & industrial
• Household, automotive and industrial
• Household, automotive and industrial use
• Ideal for all surfaces
• Ideal for home, school or office usage:
• Ideal for household repairs, DIY tasks and handicrafts
• Ideal for indoor furniture, model building and craftwork
• Ideal for industrial, home, school or office usage
• Ideal for use with high viscosity water based paints
• Industrial
• Industrial and industrial
• Instant repair
• Interior Woodwork
• Joint sealing
• Light duty application onto internal and sheltered external walls and floors.
• Light duty on interior walls and floors.
• Metal and wooden window frame
• Mirror installations
• Multi purpose
• Multi Purpose
• Multi- Purpose
• Multi -Purpose
• Multi purpose filling
• Multipurpose
• Multi-purpose
• Multi-Purpose
• Multi-Purpse
• Nutlock
• Packaging
• Packaging and DIY
• Packaging industry
• Paint
• Paint Brush, Roller or airless spray
• Painting
• Painting and general purpose
• paints, varnishes, glues & resins
• Plumbing and automotive
• Processing of silicone, packed in cartridges, for 310 ml content
• PVA & gloss
• Quality finish for water / solvent-based paint and wood treatment
• Quick repairs
• Rear view mirror, glass and DIY
• Repairing
• Roller / Brush
• Sanitary ware and DIY applications
• Spray
• Steel
• Thread locker
• Waterproof sealing
• Waterproofing
• Woodblock adhesive
• Wooden tiles
• Woodwork

• Application
• Brush
• Brush & spray
• Brush , roller and spray
• Brush / Roller
• Brush or roller
• Brush or spray
• Brush, Roller
• Brush, roller and airless spray
• Brush, Roller or airless spray
• Brush, spray
• Distribution of caulk
• General purpose
• General purposes
• Household , automotive and industrial use
• Household ,automotive and industrial use
• Household, automotive & industrial
• Household, automotive and industrial use
• Household, automotive and industrial use
• Household, industrial and automotive use
• Industrial interior and exterior use
• Interior & exterior
• Interior and exterior applications
• Packaging
• Roller / Brush / Airless spray
• Shoes , leather , belts
• Wood

• application
• Brush and roller

• Application Environment
• Warm, Dry, Dust Free Atmospher

• Application method
• Brush or roller
• Hot melt glue gun

• Application methods
• Brush, roller or airless spray
• Brush and roller

• Application methods
• Brush and roller
• Brush or roller
• Brush, Roller (short-nap mohair or foam), or airless spray
• Brush, Roller or airless spray
• Brush, roller or airless spray
• Brush, roller or spray application
• Brush, roller or spray application.

• Application Rate
• 5-7m² per Lt

• Application temperature
• 18°C to 35°C
• 10 - 30°C
• 5°C to 40°C
• Application temperature Min. 5°C to Max. 50°C

• Application temperature
• Min. -5°C to max. +35°C
• +5 to +30 °C
• Application temperature 15°C to 30°C

• Application Temperature
• 5 °C to 40 °C
• 5C to 30C

• Application temperature range
• Min. -5°C to max. +30°C

• Application temperature range
• Min. 0°C to max. 50°C

• Application Temperature:
• +5 °C to +35 °C

• Application Temperature:
• +5 °C to +35 °C

• Application type
• Spray

• Applications
• Home and industrial uses
• Security, television and general electronic cabling to walls and ceilings
• Surfaces exposed to damp, wet or underwater conditions.

• Applications
• Metal , concrete , wood and stone

• Applicatiuon
• Brush or roller

• Appliction
• Household, automotive and industrial use

• Appllication
• General Purpose

• Base
• Latex based

• Base/Type
• Ethyl cyanoacrylate

• Blade Length
• Clear

• Blade material
• Stainless Steel

• Boiling Point
• 110ºc
• 60-90°C

• Boiling Point
• 60-90°C

• Boiling point
• 60-90ºc

• Boiling point/range
• Above 56 °C

• Bristle
• Synthetic

• Bristle material
• Blended
• Synthetic

• Bristle type
• Premuim blended

• Bristle type
• Synthetic & natural

• Bristles
• Natural
• Natural & soft
• Synthetic
• Synthetic
• Synthetic & natural

• Bristles
• Synthetic

• Brush size
• 100mm
• 25mm
• 38mm
• 50mm
• 63mm
• 75mm

• Brush Size
• 100mm
• 10mm
• 150mm
• 19mm
• 25mm
• 38mm
• 50mm
• 63mm
• 75mm

• Brush sizes
• 12,25,38,50,65mm

• Can be cut
• 2 -5 hours

• Cap Colour
• Blue

• Cap colour
• Red

• Capacity
• 300ml
• 300ml

• Capacity
• 300ml
• 300ml

• Catridges sizes
• 260ml to 315m

• Clean Up
• Turps

• Cleaning
• Water
• Water or liquid detergent

• Cleaning
• Water

• Cold Resistance
• Retains elasticity down to –30°C

• Color
• Admiral grey
• African mahogany
• Battleship grey
• Beige
• Black
• Blue
• Bright aluminium
• Bright red
• Bright yellow
• Brilliant green
• Brilliant white
• Brilliant White
• Bronze
• Brown
• Brown oxide
• Charcoal
• Clear
• Copper
• Cream
• Dark green
• Dark blue
• Deep green
• Ebony
• Fresh white
• Gold
• Golden yellow
• Green
• Grey
• Hot pink
• Imbuia
• Ivory
• Kingfisher blue
• Light oak
• Machinery grey
• Magenta
• Magnolia
• Matt black
• Mid brunswick green
• Mid brunswick green
• Navy blue
• Ocean blue
• Orange
• Phthalo blue
• Phthalo green
• Pink
• Post office red
• Raw umber
• Red
• Red oxide
• Rose gold
• Rustic red
• Sea grey
• Signal red
• Silver
• Silver grey
• Silver/grey
• Sky blue
• Terracota
• Violet
• Whisper grey
• White
• Yello
• Yellow
• Yellow oxide

• COlor
• Brown
• White
• Yellow

• Color
• John deere green
• White

• Colour
• Pink

• Colour
• White
• Black
• Blue
• Brilliant white
• Brown
• Canary Yellow
• Cherry
• Clear
• Cream
• Dark oak
• Dries clear
• Fleece White
• Fluorescent red
• Fluorescent violet
• Grass green
• Grecian grey
• Green
• Grey
• Imbuia
• Khaki green
• Light grey
• Light oak
• Mahogany
• Natural
• Oak
• Pine
• Post office red
• Quartzite
• Red
• Reddened clay
• Sapele
• Signal red
• Silver
• Summer cream
• Teak
• Terracota
• White
• Yellow

• Colour
• Black
• Black
• Brilliant White
• Brilliant white
• Brilliant white
• Chrome
• Clear
• Cream
• Dark oak
• Fluorescent green
• Fluorescent orange
• Fluorescent pink
• Fluorescent yellow
• Green
• Light oak
• Pink
• Rich Pale
• Silver
• White
• White

• Colour – Prior to curing
• White inner / light blue outer
• White Outer / Khaki Inner

• Colour – Prior to mixing
• Blue Outer / White Inner
• Grey Outer / Black Inner

• Colour – Upon curing
• Off White
• Off White
• Steel grey
• White

• Colour / Finish
• Clear Lacquer

• Colour/Finish
• Grey Primer

• Complete Curing (20°C):
• 7 days

• Completely dry Time
• 35 Mins

• Composition
• Bitumen

• compressive strength at 25°C
• 70 MPa

• Compressive strength at 25°C of 70 MPa
• 70 MPa

• Contents
• Alcohols, Ketones, Acetates and Aromatics

• Continous temperature Rating
• 150°C

• Continuous Temperature rating
• 150 °C

• Continuous temperature Rating
• 75°C.

• Coverage
• Approx. 2.8m2 at 1mm thickness
• Approximately 2m2 per litre (double sided application.)
• 10 - 15m² per Lt
• 100ml per 200 grams
• 12 metres
• 2m2 per litre (double sided application.)
• 7 - 8m² per Lt
• 8 - 10m² per Lt
• 8 sq mtrs per ltr
• 8-10 m² per Lt
• 8-10 Sq Meters per coat
• 8-10 Sq Meters per Lt
• 8-10m² per Lt
• 8m² per Lt

• Coverage
• +-10m²/Lt
• 0.25m² per Lt
• 10 Sqm/Lt
• 10-12m² pe Lt
• 10-12m² per Lt
• 10-15m² per Lt
• 10m² per Lt
• 11m² per Lt
• 12 mtr
• 12-14m² per Lt
• 12m² per Lt
• 1m² per kg
• 1Sqm/Lt
• 2 to 3m2 per Lt
• 20ml per Lt
• 2-3m² per Lt
• 28m² per Lt
• 4-5m² per Lt
• 4-6m² per Lt
• 5 - 7 Sq Meter per Lt
• 5 Sq Meters Per Litre
• 5-12m² per Lt
• 5-7m² per Lt
• 5m² per 250ml
• 5m² per Lt
• 6.6m² per Lt
• 6-8m² per Lt
• 6m² per Lt
• 7 - 8m² per Lt
• 7-8m² per litre
• 7-8m² per Lt
• 7m² per Lt
• 8 - 10m² per Lt
• 8-10 m² per Lt
• 8-10m² pe Lt
• 8-10m² per Lt
• 8-11m² per Lt
• 8m² per Lt
• 9-10m² per Lt
• 9-11m² per Lt
• 9m² per Lt
• Approx. 6m²/kg.
• Approximate coverage 1 m2/L. Dependent on application method.
• Depends on use

• Coverage – 280ml cartridge
• 11 metres (5mm x 5mm joint)

• Coverage (280ml cartridge)
• 11 meters (5mm x 5mm joint)

• Coverage (280ml catridge)
• 11 meters (5mm x 5mm joint)

• Coverage (90ml cartridge)
• 3.5 meters (5mm x 5mm joint)

• Coverage (90ml tube)
• 3.5 meters (5mm x 5mm joint)
• 3.5 meters (5mm x 5mm joint)

• Coverage for 280ml cartridge
• 11 metres (5mm x 5mm joint)

• Coverage per litre
• 8-10m² per Lt

• Coverage/kg
• ± 1m²/kg using a 6x6x6 notched trowel. The estimated coverage depends on the nature of the surface

• Coverage/kg
• Approximately 0.8m2 using a 6x6x6mm notched trowel

• Coverage/L
• ±4m²/L depending on the porosity of the substrate and thickness of the adhesive film

• Cure Time
• 24 hours depending on bead size and substrates being bonded

• Curing time
• Approx. 24 hours
• Approx. 24 hours per 2m
• Approximately 24 hours per 2mm (25°C, 50% RH)
• 24 hrs
• Approx. 24 hours per 2mm

• Curing time
• Approx. 24 hours
• 24 Hours

• Curing time Approx
• per 3-4mm

• Curing time Approximately
• Approximately 24hours per 2mm

• Density
• 0.97g.cm

• Density
• 1.3 g/cm3 at 23°C
• Approx. 0.85 (g/cm3 @ 20°C)
• Approximately 1.06g/cm³
• Approximately 1.0g/cm3
• Approx. 0.840 g/cm³
• Approx. 1.38 g/cm3
• Approximately 1.10g/cm
• Approximately 1.14g/cm³
• Density (g/cm³) 1.1

• Density
• 25-30kg/m³
• (g/cm³) 1.6
• 0.17 to 0.30Density (g/cm³)
• 0.97g.cm
• Approx. 0.83 g/cm3 @ 20 °C
• Approx. 0.85(g/cm3 @ 20°C)
• Approx. 1.65 ± 0.03 g/cm3
• Approximately 0.85g/cm³
• Approximately 1.6g/cm³
• Density (g/cm³) 1.6
• Density Approx. 2.0 g/cm³
• Density Approximately 1.36g/cm³

• Density (g/cm³)
• Approximately 1.33
• Approximately 1.3g/cm³

• Density @ 20 °C
• Approx. at 0.83 g/cm3

• Density 1.62 g/cm3 at 23°C
• Density 1.62 g/cm3 at 23°C

• Density Approx
• Approx. 1.03 g/cm3

• Density Approximately 1.06g/cm³
• Approximately 1.06g/cm³

• Density:
• 1.1g/cm3

• DENSİTY: 17±2 kg/m3
• DENSİTY: 17±2 kg/m3

• Disposal
• Dispose of container-do not use for any other purpose

• Dry time
• 2-4 hours to dry

• Dry time
• 1 hrs
• 30 mins
• 30 minutes
• 4 hours
• 4 hrs

• Drying
• 1 Hour
• 60 minutes

• Drying
• 1 hour at 23°C
• 4 hours

• Drying Time
• 1 hour
• 1 hour at 23°C
• 16 Hours at 25°C
• 2 hours
• 2 hours at 25°C
• 2-4 hours
• 30 mins
• 30 minutes
• 4 - 6 hours
• 4 hours
• 4 Hours
• 4 hours at 23°C
• 4-6 hours
• Allow Overnight Drying

• Drying time
• 1 hour
• 15 minutes
• 1hr
• 2 hours
• 24 hours
• 30 mins
• 30 minutes
• 4 days
• 4 hour
• 4 hours
• 4 hrs
• 4 hrs
• 4-6 hours
• 4hrs
• 4hrs @ 25ºc
• 5-15minutes
• 6 hours
• Overnight

• Drying Time
• 1 hour
• 2 - 5 minutes at room temperature
• 30 minutes
• 4 hours
• 4 hours at 23ºC
• 6 hours
• Drying Time Approximately 24 hours (porous surfaces)
• Touch dry 4 hours

• Drying time
• 1 hour
• 1 hr
• 10 minutes to 4 hours, depending on thickness of application, temperature, humidity and surface to be treated
• 2 hours
• 4 hours
• 4 hrs
• 4 hrs
• 6 hrs
• Drying time Skins with 4 - 7 days at 23°C 65% humidity

• Final cure
• 60Minutes

• Final setting time
• Approximately 24 hours at 25°C and 50% humidity

• Finisg
• High gloss

• Finish
• Mild sheen
• Gloss
• High gloss
• Low sheen
• Matt
• Matt to low sheen
• Metalic
• Metalic Mirror
• Mild sheen
• Soft sheen
• Soft sheen

• Finish
• Authentic Patina Finish
• Gloss
• Hammer
• Hammer gloss
• High Gloss
• High gloss
• High silver lustre
• Low gloss
• Low sheen
• Matt
• Matt to low sheen
• Metalic
• Mid sheen
• mid sheen
• Mild sheen
• Satin
• Satin sheen
• Semi gloss
• Silky black
• Silky sheen
• Velvet sheen

• FInish
• Gloss
• Hammered
• Matt
• Metallic
• Satin gloss
• Smooth
• Smooth gloss

• FInish
• Gloss

• Flamablity
• Highly flammable liquid and vapour.

• Flammable
• Highly

• Full cure
• 24 hours
• After 24 hours

• Full Cure
• 2 - 3 Hrs
• 24 hours

• Full cure time
• 24 Hrs

• Full strength
• 2 days
• 1½ hour
• 30 Mins

• Full strength
• 24 hours
• 24Hrs

• Full strength time
• 24 hours.
• 24Hrs

• Full tensile strength
• < 24Hrs

• Gap filling properties
• Less than 0.05 mm

• Handle
• Plastic

• Handle material
• Plastic
• Polypropylene
• PVC
• Wood

• Handle Material
• Plastic
• Soft Rubber
• Wood

• Handle Material
• Plastic
• Rubber

• Handle materiual
• Polypropylene

• Handling bond in 4½ minutes
• 4½ minutes

• Handling bond time
• 4 Mins

• Hard dry
• 1 hour
• 12-24 hours
• 2 hours
• 3 hours
• 30 minutes
• 5-7 days

• Hardens in
• 10 Mins

• Hardens in
• 10 Mins
• 40 - 60 Mins

• Health
• Causes skin irritation. Harmful to aquatic life with long lasting effects. Suspected of damaged fertility or unborn child. Highly flammable liquid and vapour. Causes eye irritation. Wear protective gloves. Use a respirator, do not inhale vapour.

• Health & Safety
• Use protective glasses. If contact with eyes occur, flush open eyes with plenty of water and seek immediate medical attention. Causes eye irritation. Wear protective gloves. Avoid contact with skin. If contact with skin occurs, each with soapy water. Do not eat, drink or smoke when using product. Take off all contaminated clothing and wash before reuse. Use a respirator, do not inhale vapor. Use within well-ventilated areas. If exposed to fumes move victim to fresh air and seek immediate medical attention.

• Heat resistance
• up to +120°C

• Heat resistance
• 40˚c to +150˚c

• Heat resistance
• 90°C
• Approximately 80°c
• Can go up to +120°C.
• Can go up to +150°C.

• Heat Resistance
• Up to 50°C
• up to 80 °C

• Heat resistance
• –10°C -70°C
• 149°C
• 180°C
• up to 260°C
• Up to 80°C

• Heat Resistance
• Softening occurs at elevated temperatures above 45°C

• Heat resistant
• Can withstand up to 149°C.

• Heat resistant
• Can withstand up to 149°C.

• Indoor/outdoor
• Indoor

• Indoor/Outdoor
• Indoor & outdoor
• Outdoor

• Ingredients
• Latex- based

• Initial boiling point and boiling range:
• >200°C

• Maimum temperature resistance
• 105°C

• Main component
• Ethyl Cyanoacrylate

• Material
• Adhesive for general sealing and maintenance work on roof leakages
• Fibreglass
• Powder
• PVC

• Materials bonded
• rubber, leather, carpet tiles, resin laminates, wood, hardboard, metal, canvas, linoleum, felt, cork, ceramics

• Maximum bond strength (
• Achieved after 12 hours

• Maximum Contineuos heat
• 100°C

• Maximum Continuous high temperature
• 90°C

• Maximum Temperature resistance
• 95°C

• Maximum temperature resistance
• up to 100°C

• Maximun thickness per coat
• 5mm

• Melting point/freezing point:
• -22°C

• Minimum Application Temperature
• 4°C

• Minimum application temperature
• Minimum application temperature 4°C

• Mix ratio
• 200ml per 5Lt

• Mixage
• Ready to use

• Oil resistance
• Very good resistance to motor oils

• Operating Temperature
• 0°C to 80°C

• Operating temperature
• -40°C to 100°C

• Operating Temperatures
• -40°C to +100°C
• -40°C to 120°C

• Operating temperatures
• -40°C to +120°C

• Overcoating Time
• 36 Hours at 25°C
• 18 hours at 23C
• 4 Hours at 25°C
• 4 hours at 25°C

• Overcoating Time
• 4 Hours

• Paint
• PVA & gloss enamel

• Paint Brush Size
• 100mm
• 125mm
• 12mm
• 25mm
• 38mm
• 50mm
• 75mm

• Paint type
• PVA
• PVA & gloss enamel

• Perfomance
• High

• pH
• Approx. 7
• 4

• PH
• 6.0 – 7.0
• 7

• PH
• Approximately 6.3
• PH Approximately 4.0

• pH:
• ~6-7

• Pressing and Clamping time
• Approx 1hr

• Product Colour
• Blue

• Product colour
• Red

• Quality
• Foam

• Quantity
• 3 brushes
• Quantity 10

• Ready-to-cut time
• 15-20 min.

• Recoat
• 18 hours
• 4 hours
• 4 hours
• 48 hours

• Recoat
• 4 hours
• 4 hours at 23°C

• Recoat time
• 1 hour
• 1-2 hours
• 16-18 hours
• 18 hours
• 2 hours
• 24 hours
• 3 hours
• 4 hour
• 4 hours

• Recoat Time
• 18 hours
• 3 hours

• Recoating
• 1 hour
• 16 - 18 hours
• 16 hours
• 16-18 hours
• 16hrs @ 25ºc
• 18 hours
• 18 hrs
• 2 hrs
• 3 hours
• 4 hours
• 4 hrs
• 4-6 hours

• Recoating
• 18 hours
• 18 hrs
• 4 hrs

• Recoating time
• 14 hours
• 18 hours
• 2 hours
• 4 hours

• Recoating Time
• 16 - 18 Hours
• 16 hours
• 16-18 hours
• 2 hours
• 3 hours
• 4 hours
• 4 hours at 23°C

• Recoating Time
• 16 hours at 23ºC
• 18 hours
• 18 hours

• Recoating time
• 18 hours
• 18 hrs
• 4 hrs

• Recommended Gap
• 0.05 / 0.13

• Recommended maximum gap
• 0.02-0.25

• Roll Length
• 10m
• 20m

• Roller size
• 110mm
• 50mm

• Safety
• Keep product away from heat, flames, sunlight, static or electrical sparks. In the event of a fire, use Carbon Dioxide Foam or Chemical Powder, Not Water.

• Scraper Material
• Stainless Steel

• Scraper Size
• 100mm
• 25mm
• 50mm
• 75mm

• Service Temperature
• -40°C to +100°C

• Service Temperature
• 5-80 °C

• Service temperature range
• -10 to 50°C
• Min. -10°C to Max. 80°C
• Min. –20°C to max. +80°C
• Min. -10°C to max. 70°C
• Service temperature range -5°C to + 60°C

• Service temperature range
• Min. -5°C to max. +50°C
• Min. -10°C to max. +80°C
• Min. -10°C to max. 80°C
• Up to 40 °C

• Set Time
• 2hrs

• Set time
• 2hrs
• 6 hours

• Sets hard
• ± 45 minutes (at 23°C)

• Setting time
• ± 15 minutes (at 23°C
• Approx. 24 hours depending on substrate porosity and environmental conditions
• Approx. 2mm per 24 hours
• Sets in 007
• Under 15 Seconds

• Setting time
• 10 to 60 seconds – dependent on nature of substrate, temperature, and humidity
• 24 hours, depending on temperature

• Setting/drying time
• Approximately 60 minutes according to prevailing conditions

• Settting time
• 4Hrs

• Shelf life
• 12 months

• Shelf Life
• 12 Months
• 12 months

• Shelf life
• 24 months

• Size
• 100mm
• 150mm
• 165mm
• 1kg
• 1l
• 225mm
• 25mm
• 260ml
• 280ml
• 3 meters
• 300ml
• 36mm
• 38mm
• 3m
• 48mm
• 500g
• 50ml
• 50mm
• 5KG
• 75mm
• 90ml

• Size
• 280ml
• 300ml
• 3x3g

• SIze
• 500g

• Sizes
• 2x12mm, 2x25mm, 2x38mm, 2x50mm, 2x63mm

• Skin Formation
• 15 Min

• Skin formation
• 15 Min

• Softening time
• 10-20 mins on enamels

• Solids
• Approx. 80%

• Solubility in Water
• Miscible

• Solubility in water
• Not soluble

• Solubility In Water
• Not Soluble
• Not Souluble

• Spread Rate
• 10 Sq Meter per Litre
• 100-250g/m2
• 60-250g/m2

• Spread rate
• 100-250g/m2

• Spread rate
• 60-250g/m2

• State
• Liquid
• Pasty liquid
• Powder

• Storage
• Cool, well-ventilated area below 23˚ C.

• Storage Temperatue
• 0-28°C

• Storage Temperature
• 0-28°C

• Storage temperature
• 0-28ºc

• Surface dry
• 10 minutes
• 15 minutes

• Tack free time:
• Approx. 5-10 min.

• Tack off time
• Approx. 30 - 45 minutes depending on site conditions: temperature, humidity and surfaces to be treated

• Tape adhesive
• Double sized

• Tape size
• 24 mm x 1mtr

• Tape size
• 24mm x 3 mm x 1mtr

• Temperature resistance
• – 45°C and up to 150°C
• -40 to +90 ºC
• – 40°C to 120°C
• Retains elasticity down to – 40°C and up to 100°C

• Temperature Resistance
• -30 °C to +100 °C
• -55°C to180°C
• ≥ 120
• -55°C -180°C.
• 90℃

• Temperature resistance
• – 45°C and up to 150°C
• -40°C to 100°
• 45°C to 150°C
• -55°C to 180°C
• Approximately -20 to 80°C
• up to 260°C

• Temperature Resistance
• Approximately -20C to 80C

• Temperature resistance up to 180°C
• Up to 180°C

• Temperature resistance
• -400ºC until +1000ºC (cured)

• Temperature Resistance:
• -40 °C to +90 °C

• Tensile Strength
• 1.5 – 1.8 MPa

• Thickness
• 0.8mm
• 1.5mm
• 1mm
• 3mm

• Thining
• Mineral turpentine
• Ready for use but may be thinned minimally on highly porous substrates
• Turpentine
• Water

• Thinner
• Mineral Turpentine
• Mineral turpentine
• No , ready to use
• Thinning not recommended, ready for use after thorough stirring
• Water

• Thinner
• Mineral turpentine

• Thinning
• Lacquer thinners
• Mineral turpentine
• Mineral Turpentine
• Turpentine
• water
• Water

• Thinning
• Mineral Turpentine
• Mineral turpentine
• Not recommended
• Thinning not recommended. Ready for use after thorough stirring
• Turpentine
• Water

• THinning
• Mineral turpentine

• Time to full cure
• 24 Hrs

• Time to initial set
• 16-26

• Time to initial set Min
• 8 - 18 Mins

• Tintable
• No

• Touch dry
• 2 hours
• 30 minutes
• 4-6 hours

• Touch Dry
• 30 to 40 minutes

• Touch dry time
• Approx. 30 minutes

• Touch dry time
• 30Min

• Touch drying
• 10-20 minutes

• Type
• Acetoxy curing
• Acetoxy curing
• Liquid
• Polyvinyl acetate adhesive
• Type Acrylic latex
• Type Natural polymer based
• Type Synthetic polymer base

• Type
• Epoxy mastic
• Ethyl Cyanoacrylate Adhesive
• Polyurethane
• Polyurethane prepolymere
• Acetoxy curing
• Acrylic
• Acrylic based
• Acrylic Foam
• Adhesive Paper
• Adhesive paper
• Cream/opaque
• Cyanoacrylate
• Epoxy
• Epoxy-urethane hybrid
• Ethyl Cyanoacrylate
• Ethyl Cyanoacrylate Adhesive
• Expanding polyurethane foam
• Fibreglass reinforced polymer compound
• Flexible silicone rubber
• Gummed paper tape
• High temperature
• Hot melt adhesive
• Hybrid polymer
• Liquid and powder
• Metal
• Methacrylate adhesive
• Neoprene / polychloroprene adhesive
• Nitrile rubber solution
• Oil based
• One-part acetoxy-curing silicone
• Paintable Acrylic
• Paste
• Polychloroprene solvent based adhesive
• Polyester based chemical anchor
• Polymer compound
• Polypropylene
• Polyurethane
• Polyurethane foam
• Polyurethane, moisture curing
• Polyvinyl Acetate
• Polyvinyl acetate based
• Putty
• Removable
• Re-usable
• Self adhesive
• Self-fusing silicone rubber tape
• Single component cyanoacrlyate based
• Solvented, rubber based sealant,
• Steel epoxy
• Synthetic rubber-based
• Thixotropic paste
• Toughened acrylic
• Type Natural polymer based
• Water based
• Water-based synthetic ter-polymer

• Type
• Crosslinking polyvinyl acetate adhesive

• Type Neutral cure
• Type Neutral cure

• Type of Application
• Aerosol can

• Type of Paint
• Water-based

• Type Water based
• Water based

• Use
• Aluminium & metal

• Use
• Exterior
• Indoor
• Interior

• Viscosity Paste
• Paste

• Water resistance
• Good
• Excellent
• Waterproof

• Water resistance
• Waterproof
• Good
• Waterproof

• Water Resistance
• Good
• Waterproof

• White point:
• 7° C

• Will set in about 14 minutes.
• 14Mins