Search
US Dollar
Tools & Equipment
GEDORE RED ½" DRIVE 75mm SOCKET EXTENSION
SPQ12454
- For hand-operated sockets with square drive
- Has ball locking device
- Square drive with ball retention groove
$4.49
GEDORE RED ½" DRIVE 8mm BI-HEX SOCKET
ZEJ12363
- With ball retaining groove
- Hand-operated, knurled grip
- Polished, chrome-plated
$2.49
GEDORE RED ½" DRIVE 9mm BI-HEX SOCKET
WSM16635
- With ball retaining groove
- Hand-operated, knurled grip
- Polished, chrome-plated
$2.59
GEDORE RED ½" SLIDING T-BAR WITH SLIDER
DID70986
- Matt chrome-plated
- For hand-operated sockets
- Coupler with ball lock
$8.49
GEDORE RED 10" ADJUSTABLE SPANNER
WDW12211
- Jaw set at 15°
- Polished head with lasered scale
- High torque
$19.99
GEDORE RED 1000g ENGINEER BALL PEIN HAMMER
QKP18110
- Forged type from special steel
- Fibreglass handle
- Weather resistant
$22.99
GEDORE RED 10mm COMBINATION SPANNER
AOS64167
- Ring offset to 15°
- Jaw set at 15°
- Size of jaw and ring are the same size
$2.49
GEDORE RED 10x12mm HALF MOON RING SPANNER
RAS66360
- Where space is confined
- Thin walled rings
- Matt satin chrome-plated finish
$3.99
GEDORE RED 11mm COMBINATION SPANNER
QZW66000
- Ring offset to 15°
- Jaw set at 15°
- Size of jaw and ring are the same size
$2.69
GEDORE RED 11x13mm HALF MOON RING SPANNER
GJW93479
- Where space is confined
- Thin walled rings
- Matt satin chrome-plated finish
$3.99
GEDORE RED 12" ADJUSTABLE SPANNER
SRS72776
- Jaw set at 15°
- Polished head with lasered scale
- High torque
$29.99
GEDORE RED 12mm COMBINATION SPANNER
WWH91955
- Ring offset to 15°
- Jaw set at 15°
- Size of jaw and ring are the same size
$2.99
GEDORE RED 13mm COMBINATION SPANNER
KNZ50273
- Ring offset to 15°
- Jaw set at 15°
- Size of jaw and ring are the same size
$2.99
GEDORE RED 13x15mm HALF MOON RING SPANNER
XER26468
- Where space is confined
- Thin walled rings
- Matt satin chrome-plated finish
$4.69
GEDORE RED 14mm COMBINATION SPANNER
WPV81591
- Ring offset to 15°
- Jaw set at 15°
- Size of jaw and ring are the same size
$3.29
Min:
$0.00
Max:
$580.00
$0
$580
Filter by
Filter by attributes
- Material
- AC
- Accessories
- Accuracy
- Adjustable rebating depth
- Air output
- Air volume
- Airflow
- Amperage
- Amperage
- Aplication
- Appearance
- Appearance
- Application
- Application
- Arbor Size
- Arc current
- Base
- Battery capacity
- Battery Capacity
- Battery type
- Battery Type
- Battery voltage
- Beats per minute
- BELT DIMENSIONS
- BELT WIDTH
- Blade material
- Blade size
- Blade Size
- Blade thickness
- Boiling Point
- Cable length
- Capacity
- Capacity
- Case material
- Charger Input
- Charging time
- Charging Time
- Chuck
- Chuck capacity
- Chuck capacity, min./max.
- Chuck size
- Chuck Size
- Chuck Size
- Chuck Type
- Chuck type
- Chuck Type
- Clamp material
- Color
- Color
- Colour
- Contents
- Contents
- Current
- Cut
- Cut
- Cut type
- Cutting depth
- Cutting depth in non-alloyed steel
- Cutting depth in wood
- Cutting width
- Diameter
- Disc Diameter
- Disc diameter
- Disc Size
- Disc size
- Displacement
- Drilling Diameter
- Drive
- Drive Connector Square
- Drive size
- Drive Size
- Drive Type
- Eco-friendly
- Finish
- Finish
- Flamability
- Flat Welding
- Flat Welding
- Flow
- Flow rate
- Flow rate
- For diameter
- Form
- Frequency
- Grindle Spindle Thread
- Grit
- Hammer action
- Hand
- Handle
- Handle material
- Handle material
- Handle Material
- Hazard rating
- Head
- Horsepower
- Hose Length
- Impact Energy
- Impact Energy
- Impact Frequency
- Impact Rate
- Impact rate at no-load speed
- Impact rate at rated speed
- Impact Rating
- Impacts/min
- Inlet Pressure
- Inlet pressure
- Input power
- Jaw length
- Length
- Length
- Lift
- Load capacity
- Load capcity
- Main material
- Material
- Max cross section
- Max cutting depth
- Max depth
- Max diameter cable
- Max drill capacity
- Max drilling diameter
- Max impact rate
- Max length
- Max no load speed
- Max no load speed
- Max power
- Max pressure
- Max Pressure
- Max RPM
- Max temperature
- Max Torque
- Max torque
- Max Torque
- Max water temperature
- Max width
- Max. Drilling Diameter
- Maximum cutting 0-45° angle
- Maximum cutting 90° angle
- Maximum router cage stroke
- Maximum voltage
- Measurement range
- Measuring range
- Miter Angle
- Motor Rating
- No Load Speed
- No load speed
- NO LOAD SPEED
- No load speed
- No Load Voltage
- No-Load Speed
- No-Load Speed
- No-load speed
- No-load Speed
- No-load speed, 1st gear
- No-load speed, 2nd gear
- Number of pieces
- Operating Temperature
- PAPER SIZE
- Phase
- Piston Displacement
- Piston Displacement
- Planing width
- Pliers size
- PLUG VOLTAGE
- Plug Voltage
- Power
- Power
- Power Factor
- Power input
- Power output
- Power Rating
- POWER RATING
- Pressure
- Pressure
- Quantity
- Range
- Rated current
- Rated Input
- Rated input
- Rated input
- Rated Input Current
- Rated Input Power
- Rated input power
- Rated Output Current
- Rated Output Voltage
- Rated power
- Rated Power
- Rated power`
- Rated speed
- Rated Voltage
- Rated voltage
- RPM
- Sand pad size
- Sand Pad Size
- SANDING AREA
- Saw stroke length
- Set size
- Set Type
- Size
- Size
- SIze
- Sizes
- Socket type
- Solubility in water
- Spanner size
- Spanner size
- Spanner steel
- Spanner type
- Speed
- SPEED
- Spindle Lock
- Spindle Size
- Spindle size
- Steps
- Stroke rate at no load
- Stroke rate at no load
- Tank Capacity
- Tank capacity
- Tank Capacity
- Tank capacity `
- Tape width
- Temperature
- Temperature range
- Texture
- Thickness
- Tool holder
- Torque Setting
- Type
- Type
- Usage
- Vertical / Overhead Welding
- Vertical/ Overhead Welding
- Verticla / Overhead Welding
- Voltage
- Voltage
- Voltage & Frequency
- Voltage and Frequency
- Water Flow Rate
- Weight
- Welding Diameter
- Wheel size
- Width
- Working Capacity
- Working Capacity
- Working pressure
- Working pressure
- Working temperature
